What is the most common cause of LVP flooring failure in Austin TX?

Moisture from concrete slabs that was not tested or addressed before installation is the most common cause of LVP failure in Austin. The second most common cause is insufficient subfloor prep.

Does LVP need to acclimate before installation?

Yes. LVP should be stored in the installation space for 24 to 48 hours before installation to adjust to the temperature and humidity conditions of the home.

What stagger pattern is required for LVP installation?

LVP planks should be staggered so that end joints in adjacent rows are at least six to eight inches apart. Check the specific product's installation guidelines for exact requirements.

7 LVP Installation Mistakes Austin TX | CC Floors Austin

The most common luxury vinyl plank installation mistakes in Austin TX homes. Skipping subfloor prep, wrong expansion gaps, moisture issues. Capital City.

Mistake 1: Skipping Moisture Testing on Concrete: Moisture vapor from a concrete slab is the most common cause of LVP failure in Austin. Skipping the moisture test and installing anyway is a gamble that frequently results in buckling, hollow spots, a Mistake 2: Not Leveling the Subfloor: LVP requires a flat subfloor within a quarter inch over ten feet. Installing over a subfloor with high or low spots outside this tolerance causes the locking system to fail over time, creates hollow s Mistake 3: Insufficient Expansion Gap: LVP expands and contracts with temperature changes. A proper installation leaves an expansion gap of at least a quarter inch around the entire perimeter and around any fixed objects like cabinets and

Contact: (512) 769-2292 | dan@austinflooringco.com

CC Floors Austin | Complete Site Index