What tile is best for an aging-in-place shower floor in Austin TX?

Matte-finish porcelain or natural stone with a DCOF rating of 0.60 or higher is best for aging-in-place shower floors. Mosaic tile (2x2 or 3x3) is also excellent because the additional grout lines provide traction. Avoid polished tile on any wet floor surface.

What is a curbless shower and why is it important for aging in place?

A curbless shower has no raised threshold at the entry. This eliminates a significant trip hazard for older adults and wheelchair users. It requires a linear drain and careful floor slope planning to contain water without a curb.

How much does an aging-in-place bathroom remodel cost in Austin TX?

An aging-in-place primary bathroom remodel in Austin typically costs $15,000 to $35,000, depending on the scope of work. A curbless shower conversion with new tile and a linear drain typically costs $8,000 to $15,000 for the shower alone.

Does CC Floors Austin do aging-in-place bathroom remodels?

Yes. CC Floors Austin handles complete aging-in-place bathroom tile and flooring installations, including curbless shower conversions, slip-resistant tile selection, and flush floor transitions. Call 512-769-2292 for a free consultation.

Aging in Place Bathroom Flooring Austin | CC Floors Austin

Curbless showers, slip-resistant tile, and wide doorways for aging-in-place bathroom remodels in Austin TX. What the flooring and tile work actually involves.

The Flooring Foundation of Aging-in-Place Design: Aging-in-place bathroom remodels are fundamentally about reducing fall risk while maintaining a home that feels like a home, not a medical facility. The flooring and tile decisions are central to achi Curbless Shower Entry: The Most Important Change: A traditional shower has a curb — a raised threshold that contains water in the shower area. For older adults, this curb is a significant trip hazard. A curbless (zero-threshold) shower eliminates the Slip Resistance: DCOF Ratings for Wet Surfaces: Slip resistance for floor tile is measured by DCOF (Dynamic Coefficient of Friction). For wet floor applications — shower floors, bathroom floors, and any area that may get wet — the ANSI standard req

Contact: (512) 769-2292 | dan@austinflooringco.com

CC Floors Austin | Complete Site Index